Articles

Max Thick Mode on PosiTector 200 probes makes measuring on rough surfaces even easier.

The PosiTector 200 is ideal for non-destructively measuring the thickness of paint applied to plastic vehicle bumpers/fascias with or without ADAS.

This paper evaluates methods used to measure surface profiles created by power tools. Particular focus is placed on the use of a digital replica tape reader.

Measurements from PosiTector and PosiTest AT-A instruments are able to directly communicate with third-party software using USB, Bluetooth and WiFi connections.

PosiTector CMM IS In Situ Concrete Moisture Meter is the simple, durable, and accurate way to perform concrete moisture testing in accordance with ASTM F2170.

The PosiTector DPM is the ideal tool for measuring environmental parameters on the job site, paint shop, or manufacturing floor.

This article details the use of DeFelsko Coating Thickness Gages within the zinc galvanizing industry.

The PosiTector 6000 FNDS coating thickness gage measures individual thicknesses of both paint and zinc layers in a duplex coating system simultaneously.

John J. Crowe and Michael J. Makosky, G.P.I.. discuss Adhesion of Sealers on Thermal Spray Coatings in accordance with ASTM in this December 2003 JPCL article.

Marc Schilling of Corrosion Probe Inc. discusses the complexities of adhesion testing in relation to ASTM D4541 in this April 2004 JPCL article.

Phil Stevenson (founder of the American Wood Finishing Institute) discusses finish coatings system adhesion and test methods.

Coating thickness gages that use ultrasonic measurement techniques are becoming increasingly popular in industries that work with rigid substrates.

Five environmental conditions that should be observed and measured and the effect each condition has on a successful job.

A variety of recognized methods can be used to determine how well a coating is bonded to the substrate.

This discussion provides definitions, explanations, limitations and practical examples of metrology terminology realting to Coating Thickness Measurement gages.

This discussion provides definitions, explanations, limitations and practical examples of metrology terminology relating to Coating Thickness Measurement gages.

This articles focuses on the dolly preparation process and its importance in maximizing repeatability by ensuring a strong bond at the dolly-adhesive interface.

This technical note documents the importance of adhesive selection, preparation and application for bonding at the dolly-adhesive/coating-adhesive interfaces.

David Beamish of DeFelsko Corporation discusses the maintenance of electronic coating thickness gages as published in the April 2005 JPCL and PCE magazines.

Coating thickness is an important variable that plays a role in product quality, process control, and cost control.

This article describes the working principle and benefits ultrasonic testing has brought to the table.

This paper presents results from a recent analysis of measurements taken by three device types on steel; proposes a new method of depth micrometer measurement.

Various methods of abrasive impact exist to clean steel surfaces prior to applying protective coating. This paper examines replica tape as an effective source.

This paper reports on recent testing that compared numerous profiles with pull-off adhesion.

This article covers 10 important things users should know to ensure accurate DFT readings.

DeFelsko manufactures hand-held, non-destructive coating thickness gages that are ideal for measuring the wear of Organophotoconductor (OPC) Drums.

The PosiTector 6000 FS accurately and non-destructively measures mesh, emulsion and stencil thickness, as well as substrate and dry ink deposit thickness.

DeFelsko manufactures a hand-held, non-destructive ultrasonic thickness gage, ideal for measuring the thickness of aircraft windows during window restoration.

DeFelsko offers many models of the PosiTector 6000 thickness gage that are ideal for measuring the total thickness of intumescent fire resistive coatings.

DeFelsko manufactures various hand-held, non-destructive paint thickness gauges that are ideal for measuring coating thickness on wires.

A major factor affecting the long term performance of coatings on steel structures is the climatic conditions during pre-treatment and coating application.

DeFelsko manufactures a hand-held, non-destructive coating thickness gage that is ideal for measuring the thickness of anodizing on aluminum.

PosiTest AT series of pull-off adhesion testers enable an operator to accurately measure the bond strength of most types of coating applied to a rigid substrate

DeFelsko manufactures hand-held, non-destructive ultrasonic thickness gages ideal for measuring the effects of erosion and corrosion on various substrates.

DeFelsko manufactures gages that are ideal for measuring the dry film thickness of lacquers on guitar substrates such as graphite and wood.

DeFelsko manufactures various hand-held, non-destructive paint thickness gages that are ideal for use in automotive paint detailing.

The hand-held PosiTest DFT non-destructive paint meter is ideal for measuring the thickness of automotive paint on aluminum or steel automotive panels.

The focus of this application is on DeFelsko's unique ability to non-destructively measure paint thickness on gypsum board - commonly referred to as drywall.

DeFelsko manufactures hand-held, non-destructive coating thickness gages ideal for measuring the dry film thickness on Printed Circuit Boards (PCBs).

Powder coating inspectors often need a means to verify the thickness of parts as early as possible in the coating process.

DeFelsko manufactures hand-held, non-destructive ultrasonic coating thickness gages that are ideal for measuring the dry film thickness of coatings on plastic.

Non-destructive measurement of wood finishes and other coatings on wood and wood products (MDF, Vaneer, laminated composites and more).

DeFelsko’s PosiTector 6000 coating thickness gage provides quick and easy thickness measurements to ensure good print quality and lower maintenance costs.

DeFelsko’s PosiTector 200 coating thickness gage is ideal for non-destructively measuring the dry film thickness of coatings on concrete and masonry substrates.

This article describes available technologies to measure thickness of cured and uncured coating powders, associated industry test methods and standards, etc.

Because specific measures are required to ensure performace and longevity, coated concrete is arguably the material to experience coating failures most often.

This application note details the use of PosiTector Inspection instruments in accordance to SSPC-PA 14.