Setup: USB Keyboard Mode

To enable USB Keyboard mode:

‍See: www.defelsko.com/update

Once restarted, the PosiTector will be recognized as a USB keyboard device when connected to a computer. This mode is compatible with any software that accepts keystrokes.  

When a reading is taken, the numeric thickness value will be transferred followed by a carriage return (enter).        Format: Thickness <cr></cr>

Note: Only the numeric thickness reading is transferred. The measurement unit (mils/microns/mm) is not transferred. 

USB Keyboard Example:

  1. Open a spreadsheet or text editor application.
  2. Place your cursor within a cell or text area.
  3. Take a few readings with your USB connected PosiTector 6000 Advanced.Each reading automatically populates followed by a carriage return (enter).

To disable USB Keyboard mode:

Note: Any readings stored into the gage's memory while in USB Keyboard mode will not accessible for download to computer until USB Drive has been re-enabled with the gages Connect -> USB menu.